| Lubrication points | Lubrication Method | Lubricant/Grease Type | Maintenance Cycle/Key Points | Caution |
| Extruder Gearbox | Splash lubrication or forced lubrication + external circulating cooling system | N220 Extreme Pressure Industrial Gear Oil (or No. 46 Machine Oil) | Replace every six months; check oil level regularly and add as needed | Core lubrication points require oils with both extreme pressure and anti-wear properties |
| Screw thrust bearing | Lubricating Oil/Grease Lubrication | Specialized Bearing Lubricants/Greases | Special attention required; add lubricating oil | Withstands significant axial forces and requires reliable lubrication |
| Bearings/Chains/Guide Rails for Tractors, Cutters, etc | Periodically apply grease | High-temperature grease, suitable lubricant | Lubricate the traction device bearings weekly; Periodically lubricate the bearings, chains, and guide rails | Ensure smooth towing and cutting operations |
| Main Motor Bearing | Lubricating Oil/Grease Lubrication | Lubricating oil | Check the oil level and add oil promptly if it is low | Ensure stable power output |
| Lubricating Oil Pump and Filtration System | Forced-circulation lubrication (for gearboxes) | Lubricating oil of the same grade as the gearbox | Before starting the engine, activate the oil pump and ensure oil pressure does not fall below 0.5 MPa. Regularly clean the oil pump filter screen. Clean or replace the filter element | Ensure the forced lubrication system functions properly |
