News

ABS Vs HIPS Sheets: Properties, Differences And Industrial Applications

Nov 04, 2026 Leave a message

ABS vs HIPS Sheets: Properties, Differences and Industrial Applications

They can be produced on similar plastic sheet extrusion lines, so many processors mix them up when placing orders. Although both offer good surface finish and vacuum forming performance, their mechanical behaviour, heat tolerance and suitable markets are quite different. Picking the wrong sheet will lead to cracked parts, deformation or unnecessary material cost.

 

✅ ABS Sheet (Acrylonitrile Butadiene Styrene)

ABS balances rigidity, toughness and processability. It is the preferred engineering sheet for functional parts that need to withstand impact.

  • Main properties
  1. Excellent impact resistance, keeps good toughness at low temperature
  2. Higher heat deflection temperature, stable under 80–90℃ continuous use
  3. Better oil and chemical resistance
  4. Good paintability, plating capability and dimensional stability
  5. Needs proper drying before extrusion / thermoforming to avoid silver marks
  6. Weakness: standard grade has poor UV resistance; higher raw material cost than HIPS
  • Typical industrial applications Automotive interior panels, electronic equipment housings, machinery protective covers, luggage shells, power tool casings, high-grade thermoformed enclosures, recreational vehicle parts

 

✅ HIPS Sheet (High Impact Polystyrene)

HIPS is an economical thermoforming grade. It is widely used for display and packaging because it forms easily.

  1. Main properties

1.  Easy thermoforming at lower temperature, wider processing window

2.  Good stiffness, smooth surface, ideal for printing

3.  Lower material cost, stable supply for mass production

4.  Less sensitive to moisture during production

5.  Weakness: lower impact strength, poor heat resistance, easy to deform above 70℃; limited solvent resistance

  • Typical industrial applications Refrigerator inner liners, POS displays, signage, blister packaging, disposable trays, toy shells, prototype models, furniture decorative panels

 

How to Choose Correctly for Your Project

👉 Choose ABS when: Your finished parts need impact protection, higher working temperature, structural load, painting or electroplating.

👉 Choose HIPS when: You focus on cost control, deep draw vacuum forming, printing, display and inner non-structural liners.

 

FAQ

Q: Can I replace HIPS with ABS directly for refrigerator liners?

A: It works technically, but it raises your material cost. Most fridge liner projects use food-grade HIPS unless higher impact is specified.

Q: Which one is better for outdoor products?

A: Neither standard grade is UV-stable. If outdoor use is required, select UV-modified grades or add a protective coating.

 

Hot Tags: pe/pp/abs/ps/pmma/asa/hips mono or multi layer sheet/board/plate production line, China pe/pp/abs/ps/pmma/asa/hips mono or multi layer sheet/board/plate production line manufacturers, suppliers, factory, PVC Wave Roof Sheet Production Line, PMMA Sheet Production Line, plastic board extrusion line, PE Sheet Extrusion Line, PMMA Transparent Sheet Production Line, plastic sheet production line

Send Inquiry