As a leading supplier of PE Pipe Making Machines, I am often asked about the hydraulic components that play a crucial role in the operation of these machines. Hydraulic systems are essential in PE pipe making machines as they provide the power and control needed to perform various functions such as extrusion, cooling, and cutting. In this blog post, I will discuss the key hydraulic components of a PE pipe making machine and their functions.
Hydraulic Pump
The hydraulic pump is the heart of the hydraulic system in a PE pipe making machine. Its primary function is to convert mechanical energy into hydraulic energy by creating a flow of pressurized fluid. There are several types of hydraulic pumps used in PE pipe making machines, including gear pumps, vane pumps, and piston pumps.
Gear pumps are the simplest and most commonly used type of hydraulic pump. They are relatively inexpensive and have a long service life. Gear pumps work by meshing two gears together, which creates a vacuum that draws fluid into the pump and then forces it out under pressure.
Vane pumps are more efficient than gear pumps and can operate at higher pressures. They use a series of vanes that slide in and out of slots in a rotor to create a pumping action. Vane pumps are often used in applications where a higher flow rate is required.


Piston pumps are the most powerful and efficient type of hydraulic pump. They use a series of pistons that are driven by a camshaft to create a pumping action. Piston pumps can operate at very high pressures and are often used in applications where a large amount of power is required.
Hydraulic Cylinders
Hydraulic cylinders are used to convert hydraulic energy into mechanical energy. They are used to perform various functions in a PE pipe making machine, such as moving the extrusion head, clamping the mold, and cutting the pipe.
Hydraulic cylinders consist of a cylinder barrel, a piston, a piston rod, and end caps. The piston divides the cylinder barrel into two chambers: the rod end chamber and the cap end chamber. When hydraulic fluid is pumped into one of the chambers, it causes the piston to move, which in turn moves the piston rod.
There are several types of hydraulic cylinders used in PE pipe making machines, including single-acting cylinders, double-acting cylinders, and telescopic cylinders. Single-acting cylinders use hydraulic fluid to move the piston in one direction and a spring or gravity to return it to its original position. Double-acting cylinders use hydraulic fluid to move the piston in both directions. Telescopic cylinders are used when a long stroke is required in a limited space.
Hydraulic Valves
Hydraulic valves are used to control the flow, pressure, and direction of hydraulic fluid in the hydraulic system. They are essential for the proper operation of a PE pipe making machine as they allow the operator to control the various functions of the machine.
There are several types of hydraulic valves used in PE pipe making machines, including directional control valves, pressure control valves, and flow control valves. Directional control valves are used to control the direction of hydraulic fluid flow. They can be either manual or automatic and are used to control the movement of hydraulic cylinders and other components.
Pressure control valves are used to control the pressure of hydraulic fluid in the system. They can be either relief valves or pressure-reducing valves. Relief valves are used to prevent the pressure in the system from exceeding a certain limit, while pressure-reducing valves are used to reduce the pressure of the hydraulic fluid to a specific level.
Flow control valves are used to control the flow rate of hydraulic fluid in the system. They can be either adjustable or non-adjustable and are used to control the speed of hydraulic cylinders and other components.
Hydraulic Filters
Hydraulic filters are used to remove contaminants from the hydraulic fluid in the system. Contaminants such as dirt, metal particles, and water can cause damage to the hydraulic components and reduce the efficiency of the system.
There are several types of hydraulic filters used in PE pipe making machines, including suction filters, pressure filters, and return filters. Suction filters are located at the inlet of the hydraulic pump and are used to prevent large contaminants from entering the pump. Pressure filters are located in the pressure line of the hydraulic system and are used to remove smaller contaminants from the hydraulic fluid. Return filters are located in the return line of the hydraulic system and are used to remove contaminants from the hydraulic fluid before it returns to the reservoir.
Hydraulic Reservoir
The hydraulic reservoir is used to store the hydraulic fluid in the system. It also serves as a heat exchanger, allowing the hydraulic fluid to cool down before it is recirculated through the system.
The size of the hydraulic reservoir depends on the size and type of the PE pipe making machine. It should be large enough to hold enough hydraulic fluid to meet the requirements of the system and to allow for expansion and contraction of the fluid due to temperature changes.
The hydraulic reservoir should also be equipped with a breather to allow air to enter and exit the reservoir as the fluid level changes. This helps to prevent the formation of a vacuum in the reservoir, which can cause damage to the hydraulic components.
Conclusion
In conclusion, the hydraulic components of a PE pipe making machine are essential for its proper operation. The hydraulic pump, hydraulic cylinders, hydraulic valves, hydraulic filters, and hydraulic reservoir all work together to provide the power and control needed to perform various functions such as extrusion, cooling, and cutting.
As a supplier of PE Pipe Making Machines, we offer a wide range of high-quality hydraulic components that are designed to meet the specific requirements of our customers. Our hydraulic components are manufactured using the latest technology and are tested to ensure their reliability and performance.
If you are interested in purchasing a PE Pipe Making Machine or need more information about our hydraulic components, please feel free to contact us. We will be happy to assist you with your inquiry and provide you with a quote.
For more information about our plastic pipe production lines, please visit the following links:
PE Silicon Core Pipe and Multi-Layer Pipe Extrusion Production Line
PVC/PE Multi-Hole Pipe Twin Pipe Multi-Pipe Extrusion Production Line
PVC Fibre Enhancing Soft Pipe Extrusion Production Line
References
- Fluid Power Handbook, edited by William J. Adamczyk
- Hydraulic Systems and Components: Selection, Installation, and Troubleshooting, by Robert Sheaf
- Handbook of Hydraulic Engineering, edited by Victor L. Streeter
